What You Should Know About Tankless Water Heater Installation »

 What You Should Know About Tankless Water Heater Installation

12/7/2011

If you decide to use an electric tankless water heater then you will need to take account of the electrical requirements such as voltage, amperage and circuit breaker needed. Most retailers carry units that will accommodate 110V, 120V, 208V, 220V, 240V and 277V. There are different requirements as far as amp draw; you will want to be sure that your home can support the type that you choose. It could be required to put your newMaternity Wedding Dresses electric water heater on a breaker of its own. You should consult a qualified licensed electrician for more information.

Should you decide to use one of the gas-powered types you will need to consider the gas type and venting requirements. You will need to know whether you have natural gas or propane and it is very important that you make sure that your gas line meets the requirements of your new installation as it could be very different from your existing tank style water heater. You will also need to think about venting for your tankless water heater installation. Be sure to include category "III stainless steel UL1738" certified venting for your gas water heater. It is not acceptable to use "Type B." Many tankless water heater manufacturers have gas-venting kits and depending on where you plan to install it, a pre-made kit will most likely meet your needs.

Be sure to measure the entire vent route and decide whether it will go through the wall or the ceiling and make sure you have an acceptable clearance and plenty of air for the combustion; then you will be able to choose the appropriate gas venting pieces. Another important note is that gas heaters may still require a minimal electric connection, so be sure to read the requirements for any units you are considering.

You will also need to think about where you need the hot water - atEvening Dresses one bathroom sink (a single point), an entire bathroom (a multipoint), or a whole house. It is important to take note of how many fixtures you have that will need hot water as each one has its own requirements. It is usually best to have a qualified licensed contractor install your new heater.

You can make the most of its energy efficiency with proper installation and maintenance. Consider that storage water heaters only last about 10 to 15 years; tankless water heaters can last more than 20 years and they have easily replaceable parts. Add to that a little water heater maintenance periodically and you can extend its life and efficiency for years to come. A tankless water heater installation can save you money on energy and replacement cost.

Tags : dress
Category : reserved to connected users | Write a comment | Print

Comments

| Contact author |